SR-2303SAC-HP
Product Data
- Innovative minimum brightness setting function
- Single wire push switch input for push dim function
- Great compatibility with universal 8V-230V~ input push switches
- To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights
- Mini size, easy to be installed into a standard size wall box
- Waterproof grade: IP20
- In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2
- Built-in DALI-2 interface, DALI DT6 device
- Match all DALI systems in the market
- AC phase cut dimmer with both DALI and push switch control interface
- 100-240VAC wide input and output voltage,
- 1 DALI address to control 1 channel output, up to 400W
- Input and output with screw terminals, safe and reliable
- Trailing edge dimming, supports resistive loads and capacitive loads
Send Enquiry Now
Input Voltage | 100-240VAC |
Output Voltage | 100-240VAC |
Output Current | 1.8A max |
Output Power | 4x(60-180)W |
DALI Consumption | 2mA max |
Size(LxWxH) | 45.5x45x20.3mm |
Setting DALI Address:
1 DALI addresses for 1 channel output is assigned by DALI Master controller automatically, please refer to user manuals
of compatible DALI Masters for specific operations.
Setting minimum brightness:
Adjust brightness to a level, then press and hold down “Min. Set ” key on the dimmer until the light flashes, once set a minimum brightness, the light can only be dimmable between this minimum brightness and maximum brightness.
The dimming range of this dimmer is 5%-100%, but some load types may flicker when dimmed to 5%, thus a minimum brightness shall be set higher than 5% to avoid flickering during dimming process.
Delete the minimum brightness:
Adjust the brightness to maximum level, then click “Min. Set” key on the dimmer to delete the minimum brightness, the
light will flash to indicate successful reset.
PUSH DIM:
While connected with PUSH switch, click the button to switch ON/OFF lights. Press and hold down the button to increase/decrease light intensity.