SR-2309PRO-5C
Product Data
- In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011
- Built-in DALI-2 interface, DALI DT8 device
- Multi-addresses enabled DT8 control gear
- Multi-devices integrated in one control gear
- Multi-functional, 8 in 1: Tc, RGBWAF, XY, 2*Tc, XY+Tc, RGB+Tc, XY+W (DT6), DT6
- DALI address manually assignable through manual set buttons and showed on the display
- Can be set as different device types: single-address types or multi-addresses types
- Single-address device types: Tc, RGBWAF, XY, DT6
- Multi-addresses device types: 2*Tc, XY+Tc, RGB+Tc, XY+W (DT6)
- 5 Channels constant voltage output
- Control of five PWM outputs via DALI device type 8
- Color control as defined in the DALI specification device type 8
- Supports DT8 device commands, compatible with universal DALI masters that support DT8 commands
- Configuration via DALI master USB interface
- Color temperature and RGB color control through push dim mode even if without DALI
- Waterproof grade: IP20
- Numeric digital display for setting DALI address manually
- Compatible with universal AC push switch
- Compliant with Safety Extra Low Voltage standard
- Over load, over temperature protection
- IP20 rating, suitable for indoor LED lighting applications
- 5 years warranty
Send Enquiry Now
| Input Voltage | 12-36VDC |
| Output Current | 5 x 5A |
| Output Power | 5x(60-180)W |
| Size(LxWxH) | 170x59x29mm |
| Remarks | Constant voltage |
| DALI Consumption | 2mA |
| Dimming Range | 0.1%-100% |
| Ambient Temperature | -20℃ ~ 50℃ |
1. Select a DALI Device Type
1.1. Press and hold down both buttons until digital display flashes, then release the button. 1.2. Keep clicking the 2nd button, you will get the 8 device types.Setting DALI address
2.1. Press and hold down the first button on the left until digital display flashes, then release the button.2.2. Click any of the two buttons once to select a digit, click again to change the digit until the desired DALI address appears. Click first button to set “tens” position and second button to set “units” position. The address can be set from 00~63.
2.3. Then press and hold down any of the 2 buttons until the numeric digital display stops flashing to confirm the setting.
3. Once an address is selected, depending on the device type selected, the control gear may occupies 2 consecutive addresses or 1 address. For example, if the control gear is addressed to 22 on the display, when the device type is multi-addresses type, the control gear occupies address 22 & 23, when the device type is single-address type, the control gear occupies address 22.
4. DALI Address Assigned by DALI Masters DALI address can also be assigned by DALI Master controller automatically, please refer to user manuals of compatible DALI Masters for specific operations
5. Push Dimmer Mode
While connected with an AC push switch, the digital display will show “PD” which means Push Dimmer Mode, operations under Push Dimmer Mode are as follows:
