SR-2400RB-RGB
Product Data
- DALI DT8 RGB color controller, compatible with DT8 DALI system
- Each control circuit can supply DALI power for as many as 50 DALI devices
- The lighting system responds immediately and harmoniously when the brightness level is changed at either of the control devices.
- All that while allowing for the required comfortable, easy and complete control over the lighting levels at any time.
- Innovative Function to Power DALI Bus While Connected to AC Mains
- Powered by DALI Bus while not Connected to AC Mains
Send Enquiry Now
Designation | DALI MCU |
Power connection | L, N AC mains |
Operating voltage | 100-240V AC |
Power consumption | 2.3W max |
DALI connection | DA+/DA-, max. 300m cable length, DALI power supply output current max 100mA. |
Perm. Cable cross-section | 0.5…1.5 mm2 |
Ambient temperature | 0…+50 °C |
Type of protection | IP 20 |
Protection class | II |
Dimensions | 80x80x53mm |
This device is a DALI MCU with built-in DALI bus power supply which can power DALI bus while connected with 100-240VAC mains. It also can be powered by DALI bus while not connected with AC mains.
There can be up to only 2 MCUs connect to AC 220V mains, the other MCUs powered by DALI bus.
Each control circuit simultaneously affords the integration of as many as 100 DALI ECG and of up to 4 DALI MCU control devices (control points).
Switch ON/OFF
Click the rotary knob to switch ON/OFF light.
Switch RGB color mode and brightness mode
Double click the knob to switch between RGB color mode and brightness mode.
Set the minimum brightness value
Press and hold down the knob over 5 seconds until the light flashes, to set the current brightness value as the minimum brightness value for dimming, it is dimmable from this minimum brightness value to 100%.
Delete the minimum brightness value setting
Click the knob to switch off the light first, then press and hold down the knob over 5 seconds until the light flashes, the minimum brightness value will be deleted. It is dimmable from 1% to 100% then.
There can be up to only 2 MCUs connect to AC 220V mains, the other MCUs powered by DALI bus.
Each control circuit simultaneously affords the integration of as many as 100 DALI ECG and of up to 4 DALI MCU control devices (control points).
Switch ON/OFF
Click the rotary knob to switch ON/OFF light.
Switch RGB color mode and brightness mode
Double click the knob to switch between RGB color mode and brightness mode.
Set the minimum brightness value
Press and hold down the knob over 5 seconds until the light flashes, to set the current brightness value as the minimum brightness value for dimming, it is dimmable from this minimum brightness value to 100%.
Delete the minimum brightness value setting
Click the knob to switch off the light first, then press and hold down the knob over 5 seconds until the light flashes, the minimum brightness value will be deleted. It is dimmable from 1% to 100% then.